As a specialist Electronic Extensometer manufacturer, Fine Spavy Associates & Engineers supplies and exports to industrial buyers, QA laboratories and inspection departments across UK, serving the aerospace, automotive and steel sectors. Machines are built to ISO 9513, ASTM E83 and align with BS EN, ISO, ASTM practice followed in UK, then shipped CIF to Felixstowe Port.
• This instrument is to be used on Tensile or Universal testing machines to find out Proof stress & Young’s modulus values.
In case of many brittle materials such as high carbon steels, alloy steels, light aluminium & magnesium alloys, it is difficult to get yield values. For such materials stress corresponding to a certain allowable amount of plastic deformation is termed as proof stress say 0.1% or 0.2% proof stress.
• The measuring range is upto 5mm & resolution is 0.001mm.
• Standard two fixed gauge lengths of 25 & 50 mm is provided. Different sizes gauge lengths can also be given at an additional cost.
• If this extensometer is ordered with a computerized UTM, then a special menu driven application software is provided,
• which accepts load & extension values, & evaluates proof stress values.
• The measurement accuracy satisfies all requirements of class-I as per IS:12872-1990.
| Accuracy |
Class 1 as per IS 12872 / ISO 9513 |
| Type | Strain Gauge type |
| Out-put | 0.3 mV / V / mm. (approx) |
| Excitation | 10 V. DC Nominal. |
| Measuring range | 5 mm. |
| Nominal resistance of bridge- | 350 ohm |
| Gauge length | 25 mm/50mm by means of extender |
| Resolution | 0.001 mm |
• Manufactured in India by Fine Spavy Associates & Engineers Pvt.Ltd.; direct export, no middlemen.
• Destination port (CIF): Felixstowe Port, dispatched from Nhava Sheva (JNPT), India.
• Power supply configured for 230 V, 50 Hz as standard.
• Compliance: ISO 9513, ASTM E83; compatible with BS EN, ISO, ASTM.
• Enquiry pricing in GBP or USD on request; commissioning & operator training documentation provided.
Q. Who is the manufacturer of Electronic Extensometers supplied to UK?
Fine Spavy Associates & Engineers Pvt.Ltd. manufactures the electronic extensometer in Sangli, Maharashtra, India, and exports directly to UK and across Europe.
Q. Do you export Electronic Extensometers to UK?
Yes - units are shipped CIF to Felixstowe Port, configured for 230 V, 50 Hz mains supply.
Q. Which standards does the machine conform to?
It conforms to ISO 9513, ASTM E83 and aligns with BS EN, ISO, ASTM testing practice used in UK.
Q. Do you provide installation and after-sales support in UK?
We provide commissioning guidance, operator training documentation and spares support for customers in UK, coordinated from our works in India.