As a specialist Electronic Extensometer manufacturer, Fine Spavy Associates & Engineers supplies and exports to industrial buyers, QA laboratories and inspection departments across Mexico, serving the automotive, steel and manufacturing sectors. Machines are built to ISO 9513, ASTM E83 and align with NMX, ASTM, ISO practice followed in Mexico, then shipped CIF to Veracruz / Manzanillo Port.
• This instrument is to be used on Tensile or Universal testing machines to find out Proof stress & Young’s modulus values.
In case of many brittle materials such as high carbon steels, alloy steels, light aluminium & magnesium alloys, it is difficult to get yield values. For such materials stress corresponding to a certain allowable amount of plastic deformation is termed as proof stress say 0.1% or 0.2% proof stress.
• The measuring range is upto 5mm & resolution is 0.001mm.
• Standard two fixed gauge lengths of 25 & 50 mm is provided. Different sizes gauge lengths can also be given at an additional cost.
• If this extensometer is ordered with a computerized UTM, then a special menu driven application software is provided,
• which accepts load & extension values, & evaluates proof stress values.
• The measurement accuracy satisfies all requirements of class-I as per IS:12872-1990.
| Accuracy |
Class 1 as per IS 12872 / ISO 9513 |
| Type | Strain Gauge type |
| Out-put | 0.3 mV / V / mm. (approx) |
| Excitation | 10 V. DC Nominal. |
| Measuring range | 5 mm. |
| Nominal resistance of bridge- | 350 ohm |
| Gauge length | 25 mm/50mm by means of extender |
| Resolution | 0.001 mm |
• Manufactured in India by Fine Spavy Associates & Engineers Pvt.Ltd.; direct export, no middlemen.
• Destination port (CIF): Veracruz / Manzanillo Port, dispatched from Nhava Sheva (JNPT), India.
• Power supply configured for 127 V, 60 Hz as standard.
• Compliance: ISO 9513, ASTM E83; compatible with NMX, ASTM, ISO.
• Enquiry pricing in MXN or USD on request; commissioning & operator training documentation provided.
Q. Who is the manufacturer of Electronic Extensometers supplied to Mexico?
Fine Spavy Associates & Engineers Pvt.Ltd. manufactures the electronic extensometer in Sangli, Maharashtra, India, and exports directly to Mexico and across the Americas.
Q. Do you export Electronic Extensometers to Mexico?
Yes - units are shipped CIF to Veracruz / Manzanillo Port, configured for 127 V, 60 Hz mains supply.
Q. Which standards does the machine conform to?
It conforms to ISO 9513, ASTM E83 and aligns with NMX, ASTM, ISO testing practice used in Mexico.
Q. Do you provide installation and after-sales support in Mexico?
We provide commissioning guidance, operator training documentation and spares support for customers in Mexico, coordinated from our works in India.