|
|
|
| |
HORIZONTAL CHAIN AND WIRE ROPE TESTING MACHINES (Model : FCR, FCR-E / FCR-EC) |
• |
Machines are designed to test chains, wire ropes & any long specimens for proof test or destructive tensile test. |
• |
High loading accuracy & infinitely variable straining speeds to suit a wide range of materials. |
• |
Continuous roll autographic recorder to get load - elongation graph. |
• |
Robust loading frame, Simple controls & easy to operate. |
• |
Adequate safety devices for safe operation. |
• |
Analogue models with large dial & load measurement by pendulum dynamometer principle. |
• |
Digital / Computerized models are also available where load Vs elongation is in digital display & printout of results can be taken. |
• |
Special Accessories like - Extra Bed length, Extra Ram stroke, Various special grips / attachments / fixtures as per sizes / shapes of specimens, Load-stabilizer (at extra cost) can be provided to suit special application. |
• |
Various Models – Maximum Capacity from 100 kN to 3000 kN. |
• |
Loading accuracy well within ±1%, conforms to IS:1828 / BS:1610. |
|
| |
| |
TECHNICAL SPECIFICATIONS - FOR CHAIN & WIRE ROPE TESTING MACHINES (Analogue Type) – |
| |
For Analogue Models |
FCR-100kN |
FCR-200kN |
FCR-300kN |
FCR-500kN |
FCR-1000kN |
FCR-2000kN |
FCR-3000kN |
Max.Capacity (kN) |
100 |
200 |
300 |
500 |
1000 |
2000 |
3000 |
1st Measuring Rnage (kN)
Least count (kN) |
0 - 100
0.2 |
0 - 200
0.4 |
0 - 300
0.5 |
0 - 500
1 |
0 - 1000
2 |
0 - 2000
4 |
0 - 3000
5 |
2nd Measuring Range (kN)
Least count (kN) |
0 - 50
0.1 |
0 - 100
0.2 |
0 - 150
0.25 |
0 - 250
0.5 |
0 - 500
1 |
0 - 1000
2 |
0 - 1500
2.5 |
3rd Measuring Range (kN)
Least count (kN) |
0 - 20
0.04 |
0 - 50
0.1 |
0 - 60
0.1 |
0 - 100
0.2 |
0 - 250
0.5 |
0 - 500
1 |
0 - 600
1 |
Distance between gripping
heads (mm)
(inclusive of Ram stroke) |
100 - 3000 |
100 - 3000 |
100 - 3000 |
100 - 3000 |
100 - 3000 |
100 - 3000 |
100 - 3000 |
Adjusted in steps (mm) |
500 |
500 |
500 |
500 |
500 |
500 |
500 |
Ram Stroke (mm) |
500 |
500 |
500 |
500 |
600 |
600 |
600 |
Max.Ram Speed (mm / min) |
300 |
200 |
150 |
120 |
60 |
60 |
35 |
Bed Clearance (mm) |
320 |
500 |
500 |
550 |
800 |
1000 |
1200 |
Grips for Round bar dia. (mm) |
10 - 30 |
10 - 30 |
10 - 40 |
20 - 50 |
20 - 60 |
20 - 70 |
20 - 80 |
Grips for Wire Rope dia. (mm) |
10 - 22 |
10 - 25 |
15 - 35 |
15 - 40 |
20 - 50 |
20 - 60 |
20 - 70 |
Total H.P. |
1.5 |
2.5 |
2.5 |
3 |
6 |
7 |
9.5 |
Power Supply |
3 Ph, 415V, 50 Hz, A.C. |
|
| |
| |
| TECHNICAL SPECIFICATIONS - FOR CHAIN & WIRE ROPE TESTING MACHINES (Digital / Computerised Type) – |
| |
For Digital/ Computerised Models |
FCR-EC-100
kN |
FCR-EC-
200
kN |
FCR-EC-300
kN |
FCR-EC-500
kN |
FCR-EC-1000 kN |
FCR-EC-2000
kN |
FCR-EC-3000
kN |
Least count for load (kN) |
0.04 |
0.1 |
0.1 |
0.2 |
0.5 |
1 |
1 |
Accuracy of ± 1% in the range (kN) |
5 - 100 |
10 - 200 |
15 - 300 |
25 - 500 |
50 - 1000 |
100 - 2000 |
150 -3000 |
Least count for Elongation (mm) |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
0.1 |
Distance between gripping
heads (mm)
(inclusive of Ram stroke) |
100 - 3000 |
100 - 3000 |
100 - 3000 |
100 - 3000 |
100 - 3000 |
100 - 3000 |
100 - 3000 |
Adjusted in steps of mm |
500 |
500 |
500 |
500 |
500 |
500 |
500 |
Ram Stroke (mm) |
500 |
500 |
500 |
500 |
600 |
600 |
600 |
Max.Ram Speed (mm / min) |
300 |
200 |
150 |
120 |
60 |
60 |
35 |
Bed Clearance (mm) |
320 |
500 |
500 |
550 |
800 |
1000 |
1200 |
Grips for Round bar dia. (mm) |
10 - 30 |
10 - 30 |
10 - 40 |
20 - 50 |
20 - 60 |
20 - 70 |
20 - 80 |
Grips for Wire Rope dia. (mm) |
10 - 22 |
10 - 25 |
15 - 35 |
15 - 40 |
20 - 50 |
20 - 60 |
20 - 70 |
Total H.P. |
1.5 |
2.5 |
2.5 |
3 |
6 |
7 |
9.5 |
Power Supply |
3 Ph, 415V, 50 Hz, A.C. |
|
| |
