	FINE SPAVY ASSOCIATES & ENGINEERS PVT. LTD.

ANALOGUE – TENSILE TESTING MACHINES ( Model : TKG )

•	Variety of tests like Tension, Compression, Cross breaking / Bending, Shear, Linear Bonding / Gripping / Peeling strength of adhesives & tapes, etc. are conducted.
•	Suitable for testing a wide range of materials like rubber, wood, plywood, plastic, rexins, ceramics, teflon, cardboard, latex, composites, ferrous metals, non-ferrous metals,etc. of various forms like round, flat, thread, wires, dumbells, fabric, belts, strips, ropes, etc.
•	Wide range of Grips, Attachments & Special fixtures are available to suit variety of material and shapes.
•	Continuous roll autographic “Load Vs Elongation” recorder.
•	Elongation scale with least count 1 mm.
•	Three measuring ranges for accurate testing.
•	A number of straining speeds are available for proper selection.
•	Machine with AC or DC drive motor is available.
•	Various Models – Maximum Capacity from 200 N to 50 kN.
•	Loading accuracy well within ±1%, conforms to IS:1828 / BS:1610.
•	Hand operated cutting press with different sizes dies are available for cutting dumbbell specimen.

TECHNICAL SPECIFICATION FOR TENSILE TESTING MACHINES -

Max. Capacity		Model - TKG				Model - TKG		Model - TKG
		200 N	500 N	1000 N	2500 N	5000 N	10 kN	25 kN	50 kN
Measuring Ranges	1st	0-50 N 0-100 N 0-200 N	0-100 N 0-250 N 0-500 N	0-200 N 0-500 N 0-1000 N	0-500 N 0- 1000 N 0-2500 N	0-1000 N 0-2500 N 0-5000 N	0-2 kN 0-5 kN 0-10 kN	0-5 kN 0-10 kN 0-25 kN	0-10 kN 0-25 kN 0-50 kN
	2nd
	3rd
Ranges Least Counts	1st	0.1 N 0.2 N 0.4 N	0.2 N 0.5 N 1 N	0.4 N 1 N 2 N	1 N 2 N 5 N	2 N 5 N 10 N	0.004 kN 0.01 kN 0.02 kN	0.01 kN 0.02 kN 0.05 kN	0.02 kN 0.05 kN 0.1 kN
	2nd
	3rd
Elongation Scale L.C		1 mm				1 mm		1 mm
Grip Speration Minimum - Maximum -		25 mm 1000 mm				25 mm 750 mm		25 mm 600 mm
Traverse Speeds Standard Speeds		10 Speeds - 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm / min.				100 mm / min.		25 mm / min
Optional Speeds		-				Additional speed of 50 mm/min		Alternative speed of 1.3 mm/min in place of 25 mm/min OR 10 Speeds - 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm / min.
						Additional speed of 500 mm/min
						Alternative speed of 1.3 mm/min in place of 100 mm/min
						10 Speeds - 50, 100, 150, 200, 225, 250, 300, 400, 450 & 500 mm/min.
Optional Variable speed drive stepless variation		50 to 500 mm / min.				10 to 100 mm / min.		2.5 to 25 mm / min.
H.P (for standard speed)		0.25 / 0.5				0.5		0.5
Supply		3 –Phase, 415 Volts, 50Hz, AC
Over travel safety		Provided with each model
Recorder (Graph)		Provided with each model

NOTE : It is very important that while ordering the machine due care is taken in selecting proper capacity, traverse speeds, grip separation & grips. Following details should be furnished to ensure that testing of the materials is in conformity with the standards followed –

• Size, shape, materials of test specimens.
• Minimum & Maximum breaking load for test specimen (Not strength).
• The standard IS / BS / ASTM etc. to be followed.
• Straining rate required.
• Please send representative samples.

DUMB-BELL SPECIMEN CUTTING ACCESSORIES :

Hand Operated Cutting Press, Size 150mm x 150mm
Die overall length 50 mm as per IS:34 Part I & II, IS:5831
Die overall length 75 mm as per IS:3400 Part, IS:434 Part I & II, IS:5831
Die overall length 115 mm as per IS:3400 Part I, IS:2414, IS:2415 & IS:443
Die overall length 152 mm as per IS:2076

Grips for Tensile Testing Machines ( All Versions ) -

Model	Capacity	Description	Specifications	Application
TG 1/1	500 N	Eccentric Roller grip	25 mm wide x 3 mm thick	For Dumbell shaped specimen of rubber and plastics suits TKG- 200 N & TKG -500 N
TG 1/2	2 kN	Eccentric Roller grip	25 mm wide x 5 mm thick	For Dumbell shaped specimen of rubber and plastics suits TKG -1000 N & TKG-2500 N
TG 1/3	2 kN	Eccentric Roller grip	35 mm wide x 6 mm thick	For Dumbell shaped specimen of rubber and plastics suits TKG- 1000 N & TKG -2500 N
TG 1/4	5 kN	Eccentric Roller grip	50 mm wide x 6 mm thick	For Dumbell shaped specimen of rubber and plastics suits TKG -1000 N & TKG-2500 N
TG 1/5	5 kN	Eccentric Roller grip	50 mm wide x 6 mm thick	For Dumbell shaped specimen of rubber and plastics suits TKG 5000 N & TKG 10 kN

TG 2/1	2.5 kN	Cam type grip	100 mm wide x 10 mm thick	For fabric strip suits TKG -2500 N
TG 2/2	2.5 kN	Cam type grip	100 mm wide x 10 mm thick	For fabric strip suits TKG -5000 N & TKG-10 kN

TG 3/1	200 N	Vice type grip	25 mm wide x 4 mm thick	For thin flat samples of smaller strength like paper etc suits TKG -200 N
TG 3/2	5 kN	Vice type grip	500 mm wide x 25 mm thick	For flat materials like asbestos, leather, fabric, plywood suits TKG -2500 N
TG 3/3	5 kN	Vice type grip	50 mm wide x 25 mm thick	For flat materials like asbestos, leather, fabric, plywood suits TKG -5000 N & TKG-10 kN
TG 3/4	2.5 kN	Vice type grip	20 mm wide x 5 mm thick	For rigid wires upto 1 mm and flat strips suits TKG -2500 N
TG 3/5	5 kN	Vice type grip	100 mm wide x 6 mm thick	For fabric specimen suits TKG-2500 N
TG 3/6	5 kN	Vice type grip	100 mm wide x 6 mm thick	For fabric specimen suits TKG -5000 N & TKG-10 kN
TG 3/7	5 kN	Vice type grip	200 mm wide x 10 mm thick	For fabric specimen suits TKG -5000 N & TKG -10 kN

TG 5/1	2.5 kN	Wedge type grip	25 mm wide x 5 mm thick	For flat strips and wires suits TKG -2500 N
TG 5/2	10 kN	Wedge type grip	Round 5 to 10 mm Flat 25 mm wide x 10 mm thick	For round specimen or flat specimen suits TKG -5000 N & TKG -10 kN
TG 5/3	50 kN	Wedge type grip	Round 5 to 10 mm Flat 35 mm wide x 12 mm thick	For round specimen or flat specimen suits TKG -50 kN
TG 5/4	2.5 kN	Wedge type grip	Flat 25 mm wide x 20 mm thick	For extra thick plywood specimen suits TKG -2500 N
TG 5/5	50 kN	Wedge type grip	Flat 200 mm wide x 5 mm thick	For geo textile as per ASTM suits TKG -50 kN
TG 5/6	50 kN	Wedge type grip	Flat 38 mm wide x 20 mm thick	For extra thick specimen like plywood suits TKG -25 & 50 kN

TG 6/1

2.5 kN

O ring test fixture

For testing O rings suits TKG -2500 N

TG 7/1	500 kN	Bollard type grip	20 SWG or finer	For fine flexible wires suits TKG -200 N & TKG -500 N
TG 7/2	1000 kN	Bollard type grip	Tape width 6 mm max.	For HDPE tape suits TKG -1000 N
TG 7/3	2.5 kN	Bollard type grip	20 SWG or finer	For fine flexible wires suits TKG -2500 N
TG 7/4	2.5 kN	Bollard type grip	20 SWG or finer	For fine flexible wires suits TKG -10 kN
TG 7/5	2.5 kN	Bollard type grip	20 SWG or finer	For fine flexible wires suits TKG -25 kN & TKG -50 kN
TG 7/6	5 kN	Bollard type grip	Dia 4mm ropes.	For non metallic ropes / cords of nylon etc suits TKG -5000 N

TG 8/1	10 kN	Vice cum wedge type grip	Upto 5 mm dia, Flat 25 mm wide x 5 mm thick	For wires and flat strips suits TKG -10 kN
TG 8/2	50 kN	Vice cum wedge type grip	Round 5 to 10 mm, Flat 35 mm wide x 10 mm thk	For wires. Rods, and strips suits TKG -25 kN & TKG -50 kN
TG 8/3	50 kN	Vice cum wedge type grip	Flat 35 mm wide x 5 mm thick.	For harder wires and strips suits TKG -25 kN & TKG – 50 kN
TG 8/4	50 kN	Vice cum wedge type grip	Flat 60 mm wide x 10 mm thick.	For wider flat strips suits TKG -25 kN & TKG -50 kN

TG 9/1	10 kN	Special Bollard grip	Dia 10 to 16 mm	For Nylon ropes suits TKG -10 kN
TG 9/2	25 kN	Special Bollard grip	Dia 10 to 16 mm	For Nylon ropes suits TKG -25 kN & TKG -50 kN
TG 9/3	50 kN	Special Bollard grip	50 mm wide	For flat belts and strips suits TKG -25 kN & TKG -50 kN
TG 9/4	50 kN	Special Bollard grip	100 mm wide	For flat belts and strips suits TKG -25 kN & TKG -50 kN

TG 10/1	10 kN	Grip for special shaped specimen	As per IS 867	For moulded plastic specimen as per IS 867 suits TKG -2500 N
TG 10/2	10 kN	Grip for special shaped specimen	As per IS 867	For moulded plastic specimen as per IS 867 suits TKG -10 kN
TG 10/3	10 kN	Grip for special shaped specimen	As per IS 867	For moulded plastic specimen as per IS 867 suits TKG -25 kN & TKG -50 kN

TG 11/1	200 N	Compression cage	85 (L) x 60 (D) x 140 (H) mm with dial gauge and scale	For compression test on flexible / soft materials suits TKG- 200 N
TG 11/2	200 N	Compression cage	85 (L) x 60 (D) x 140 (H) mm without dial gauge and scale	For compression test on flexible / soft materials suits TKG -200 N
TG 11/3	2.5 kN	Compression cage	100 (L) x 65 (D) x 200 (H) mm	For compression test on flexible/soft materials suits TKG -2500 N
TG 11/4	10 kN	Compression cage	150 (L) x 80 (D) x 200 (H) mm	For compression test on flexible/soft materials suits TKG -10 kN
TG 11/5	50 kN	Compression cage	150 (L) x 150 (D) x 200 (H) mm	For compression test on flexible / soft materials suits TKG- 25 & 50 kN
TG 11/6	50 kN	Compression cage with dial gauge scale and ball edge.	80 (L) x 60 (D) x 60 (H) mm	For compression test on flexible / soft materials suits TKG -25 & 50 kN
TG 11/7	50 kN	Compression cage with fixtures	As per IS 10570 / 83	For cold crushing strength suits TKG- 25 kN & 50 kN
TG 11/8	10 kN	Compression cage with dial gauge and ball cage	50 x 50 x 50 mm specimen	For compression test on plywood etc suits TKG -10 kN

TG 12/1	2.5 kN	Bend / cross breaking test fixture	50 wide x 25 thk x 150 mm span 5 mm roller radius.	For conducting cross breaking test or bend test suits TKG -2500 N
TG 12/2	10 kN	Bend / cross breaking test fixture	25 wide x 35 thk x 150 to 300 mm span.	For conducting cross breaking test or bend test suits TKG -10 kN
TG 12/3	25 kN	Bend / cross breaking test fixture	25 wide x 35 thk x 150 to 400 mm long span.	For conducting cross breaking test or bend test suits TKG -25 kN & 50 kN
TG 12/4	25 kN	Bend / cross breaking test fixture	60 wide x 10 thk x 90 mm span roller dia 30 mm	For a specimen 60 wide x 10 thk x 120 mm long suits TKG -25 kN & TKG 50 kN
TG 12/5	25 kN	MOR test fixture with compression cage	40 x 40 mm specimen x 100 span	For conducting on refractory castables as per IS 10570 / 83 suits TKG 25- kN & 50 kN
TG 12/6	1 kN	Cross breaking test fixture	50 wide x 100 mm span Roller radius 3.2 mm	For testing brake shoe material as per IS 2742 part 3 suits TKG- 2500 N
TG 12/7	2500 N	MOR test fixture	500 mm span x width 100 mm	For plywood.
TG 12/8	10 kN	MOR test Fixture with dial gauge	600 mm span x 80 mm width support radius 12, 18, 27, 37.5 mm	For plywood.
TG 12/9	5 kN	Bend test Fixture	600 mm span x width 50 mm	For two point loading as per IS 1734 part II suits TKG-25 & 50 kN
TG12/10	10 kN	Cross breaking test fixture	Span 500 mm x width 100 mm Roller dia 15	For MOR test as per IS 1658 / 77.

TG 13/1

Hand operated Press

150 mm wide

For cutting Dumbell shaped rubber specimen with respective dies suits TKG -2500 N

TG 14/1	25 kN	Shear strength attachment	20 mm width x 10 mm thk	For testing internal shear strength as per IS 2742-92 Part 5 suits TKG -25 & 50 kN
TG 14/2	10 kN	Glue shear test attachment.	30 mm wide x 25 mm thk.	For glue shear testing of plywood suits TKG -10 kN
TG 14/3	10 kN	Shear test fixture	Dia 12.7 mm	For shear testing of laminates as per IS 1998 suits TKG -25 & 50 kN

TG 15/1	10 kN	Grip for plywood screw & nail withdrawl test	75 mm wide specimen	For testing plywoods as per IS 2380 part XIV suits TKG -10 kN
TG 15/2	10 kN	Grip for plywood tensile strength perpendicular to surface	50 x 50 mm specimen	For plywood as per IS 2380 Part V suits TKG -10 kN
TG 15/3	25 kN	Grip for plywood screw & nail with drawl test	75 mm wide specimen	For testing plywood as per IS 2380 Part XIV suits TKG-25 & 50 kN
TG 15/4	25 kN	Grip for plywood tensile strength perpendicular to surface	50 x 50 mm specimen.	For plywood as per IS 2380 Part V suits TKG - 25 & 50 kN

TG 21

10 kN

Special grip for fanhook

For testing fan hook suits TKG -25 & 50 kN

TG 22/1	1 kN	Grip for security of attachment of bottom stops of Zip	-	For testing of Zip as per Annexure D of IS: 3148- 1991 Fig.7 suits TKG -2500 N
TG 22/2	1 kN	Grip for security of attachment for top steps & puller	-	For testing Zip as per Annexure H of IS: 3148- 1991 (Fig 11 and Fig. 8)